METABODY REJUVENATION SYSTEM

QUICK SETUP & OPERATE GUIDE

• REMOVE PARTS FROM BOX AND SCREW SILVER ROD INTO THE BLACK METAL BASE PLATE AND TIGHTEN. ATTACH FINGER CLAMP TO SILVER ROD ABOUT TWO THIRDS OF THE WAY UP. OPEN FINGER CLAMP BY TURNING SCREW TO RECEIVE SYSTEM OBELISK.

• REMOVE LID FROM LARGE STYROFOAM CONTAINER BY RUNNING A SHARP BLADE ALONG THE LINE THAT IS ABOUT ¾” FROM THE TOP. REMOVE LARGE OBELISK BY TILTING CONTAINER AND PLACE STANDING UP ON THE BLACK METAL BASE. TIGHTEN FINGER CLAMP AROUND THE OBELISK TO HOLD IN PLACE.

• [FIRST GENERATION] REMOVE WRAPPING FROM HIGH VOLTAGE BOOSTER BOX AND PLUG INTO GROUNDED 120VAC POWER OUTLET. INSERT THE BLACK CORDED PLUG FROM THE OBELISK INTO THE BOOSTER BOX JACK. TURN ON BOX POWER SWITCH AND NOTE THAT THE LIGHT COMES ON PLUS THE SMALL LIGHT FLASHING EVERY ONE TO TWO SECONDS. THIS INDICATES THE PRESENCE OF HIGH VOLTAGE AND PROPER GROUNDING.

• [SECOND GENERATION] REMOVE LID FROM SMALL STYROFOAM CONTAINER BY RUNNING A SHARP BLADE ALONG THE LINE THAT IS ABOUT ¾” FROM THE TOP. REMOVE SMALL (POWER) OBELISK BY TILTING CONTAINER AND PLACE STANDING UP ADJACENT TO THE LARGE (PLASMA LIGHT) OBELISK. INSERT THE BLACK CORDED PLUG FROM THE LARGE OBELISK INTO THE BLACK CORDED JACK FROM THE SMALL (POWER) OBELISK.

• [SETUP CONFIGURATION] PLACE THE SUPPORT STAND HOLDING THE LARGE OBELISK ALONG WITH ADJACENT SMALL OBELISK, OR BOOSTER BOX, ON A SMALL TABLE NEXT TO THE HEAD END OF A MASSAGE OR TREATMENT TABLE. PLACE A MIRROR, (24” OR LARGER), AT THE OTHER END OF THE MASSAGE/ TREATMENT TABLE. ADJUST THE DISTANCE BETWEEN THE FACE OF THE LARGE OBELISK AND THE SURFACE OF THE MIRROR TO THE APPROXIMATE DISTANCE INDICATED ON THE (GREEN STICKER) ON THE SIDE/ BACK OF THE LARGE OBELISK. (≈ 110”) ‘NARROW BEAM’ MODE IS RECOMMENDED FOR THIS SETUP.

• [SYSTEM OPERATION – NARROW BEAM, BOOSTER BOX] TURN ON BOOSTER BOX AND CONFIRM LIGHTS ARE WORKING PROPERLY. ADDRESS METABODY OBELISK STATING: “PLEASE OPERATE IN (MODE FROM OPERATING MODES TABLES), FOR ME OR THIS PERSON, NARROW BEAM. THANK YOU!”

ALTERNATIVE: “PLEASE OPERATE IN THE HIGHEST AND BEST MODES FOR ME AT THIS TIME, NARROW BEAM. THANK YOU.” AUTOMATICALLY SCANS THE PERSON AND MULTIPLEXES APPROPRIATE MODES DURING TREATMENT. TURN BOOSTER BOX OFF AFTER COMPLETED.

• [SYSTEM OPERATION – NARROW BEAM, POWER OBELISK] ADDRESS METABODY OBELISKS STATING: “PLEASE OPERATE IN (MODE FROM OPERATING MODES TABLES), AT THE APPROPRIATE POWER LEVEL FOR ME OR THIS PERSON, NARROW BEAM. THANK YOU!”

ALTERNATIVE: “PLEASE OPERATE IN THE HIGHEST AND BEST MODES AND POWER LEVELS FOR ME AT THIS TIME, NARROW BEAM. THANK YOU.” AUTOMATICALLY SCANS THE PERSON AND MULTIPLEXES APPROPRIATE MODES AND POWER LEVELS DURING TREATMENT. STATE “PLEASE GO TO ‘ZERO VOLTS’ POWER LEVEL, THANK YOU FOR YOUR LIGHT AND YOUR SERVICE” WHEN SESSION IS COMPLETED.

NEVER SAY “PLEASE TURN OFF” OR “PLEASE SHUT DOWN” AS THE SYSTEM CONTINUES TO OPERATE ON STANDBY MODE TO ACCEPT COMMANDS.

• [SYSTEM OPERATION – BROAD BEAM, POWER OBELISK] USE SAME STATEMENT PROCEDURES AS ABOVE BUT USE ‘BROAD BEAM’ TERM INSTEAD OF ‘NARROW BEAM’. THE OBELISK SYSTEM WILL PRODUCE A 360° TREATMENT FIELD FILLING AN ENTIRE ROOM OR BUILDING. (NO MIRROR OR TREATMENT TABLE NEEDED) THIS IS THE BEST MODE FOR TREATING SEVERAL PEOPLE AT A TIME.

HOWEVER, INDIVIDUAL TREATMENT SESSIONS ARE MORE EFECTIVELY CONDUCTED USING NARROW BEAM MODE AND A TREATMENT TABLE WITH A REFLECTIVE MIRROR. (STANDING WAVE ENERGY CYLINDER)

• [SYSTEM OPERATION – THIRD GENERATION] A BOOSTER BOX OR SEPARATE POWER OBELISK IS NO LONGER REQUIRED SINCE THE POWER PROGRAM HAS BEEN INTEGRATED INTO THE PRIMARY METABODY OBELISK. USE THE ABOVE POWER OBELISK INSTRUCTIONS.

• [SYSTEM OPERATION – REMOTE TREATMENTS] USE THE ABOVE NARROW BEAM TREATMENT PROCEDURES BUT WITH A VERTICLY PLACED PHOTOGRAPH OF THE INDIVIDUAL, WITH NAME PRINTED ON THE BOTTOM, FACING THE METABODY OBELISK IN LIEU OF THE ACTUAL PERSON. USE LONGER TREATMENT SESSION TIMES TO ENSURE OPTIMUM EFFICACY.

• IMPORTANT NOTE: THE BEST TREATMENT SUCCESS CAN BE OBTAINED THROUGH CLEAR CONCISE COMMANDS FOLLOWED BY STATEMENTS OF GRATITUDE. IN OPERATING THE METABODY SYSTEM YOU WILL BE INTERFACING WITH NON-CORPORAL SOLAR BEINGS THAT ARE IN SERVICE TO EARTH AND ITS INHABITANTS.

No medical claims are made about the use of Scalar Plasma Light Generators or Pendants to replace the need for professional medical advice or treatment. If you experience health problems you should always consult your regular physician. These energized devices are for investigational research.